Українська



Pdf көрінісі
бет1/5
Дата27.02.2017
өлшемі9,04 Mb.
#5022
  1   2   3   4   5

FC8820

FC8810


1

FC8820,

 FC8810

ENGLISH  6

ҚАЗАҚША  26

РУССКИЙ  47

УКРАЇНСЬКА  68

6

Introduction

Congratulations on your purchase and welcome to Philips!  

To fully benefit from the support that Philips offers, register your product  

at www.philips.com/welcome



Your robot (Fig. 1)

1  Handle of dust container lid

2  Dust container lid

3 Filter


4  Dust container

5  Top cover

6  Error codes table

7 Fan


8 Bumper

9  On/off button (switches robot on or to standby)

10  Power switch (switches robot on or off)

11  Front wheel

12  Side brush shafts

13  Drop-off sensors

14 Wheels

15  Battery cavity

16  Suction opening

17  Side brushes

18  Rechargeable battery

19  Battery cavity cover

20  Fixation blocks for dry wipes

21  Dry wipe holder

22  Dry wipes

23  Battery holder

24  Remote control

25  Charging cord

26 Pointer

27  Virtual wall unit

28  Docking station

29 Adapter

30  Small plug

Displays and control panels

Control panel of docking station

1  Display with time, day and programming indications

2  Adjusting and setting buttons

3  Battery indicator



ENGLISH

Remote control

1  Navigation buttons and on/off

2  Cleaning time buttons

3  Cleaning mode buttons

4  Fan speed buttons

5  Docking button



Pointer (FC8820)

1  Pointer button

2  On/off button

3  Cleaning mode buttons

4  Cleaning time buttons

5  Docking button



How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help 

you clean the floors in your home.

The robot is especially suitable for cleaning hard floors, such as wooden, 

tiled or linoleum floors. It may experience problems cleaning soft floors, 

such as carpet or rugs. If you use the robot on a carpet or rug, please stay 

close by the first time to see if the robot can deal with this type of floor. 

The robot also needs supervision when you use it on black and shiny  

hard floors.

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your floors efficiently.

 - The two side brushes help the robot clean in corners and along walls. 

They also help to work dirt loose from the floor.



ENGLISH

7


 - The suction power of the robot picks up loose dirt and transports it 

through the suction opening into the dust container.

 - The robot comes with a dry wipe holder that allows you to clean your 

hard floor even more thoroughly with dry wipes.



Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of 

cleaning patterns to clean each area of the room optimally. The cleaning 

patterns it uses are:

1  Z-pattern or zigzag pattern

2  Random pattern

3  Wall-following pattern

4  Spiral pattern

During auto cleaning, the robot uses these patterns in a fixed sequence:

1 Z-pattern

2  Random pattern

3  Wall-following pattern

4  Spiral pattern

 - When the robot has completed this sequence of patterns, it starts 

moving in Z-pattern again. The robot continues to use this sequence  

of patterns to clean the room until the rechargeable battery is empty, 

or until it is switched off manually.

 - If the robot detects a particularly dirty area during its cleaning run,  

it switches to spiral mode and to turbo fan speed to ensure thorough 

dirt removal.



Note: You can also select each mode individually by pressing the appropriate 

button on the remote control or pointer (FC8820 only). For more details,  

see chapter ‘Using your robot’, section ‘Cleaning modes’.

ENGLISH

8


How your robot avoids height differences

 - The robot has three drop-off sensors in its bottom. It uses these drop-

off sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height 

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase 

or other height difference in time. Therefore monitor the robot carefully 

the first few times you use it, and when you operate it near a staircase 

or another height difference.

Before first use

Mounting the side brushes

 1 


 Unpack the side brushes and place the robot upside down on a table 

or on the floor.

 2 

 Push the side brushes onto the shafts on the bottom of the robot.



Note: Make sure you attach the side brushes properly. Press them onto the 

shaft until you hear them lock into position with a click.

Inserting the rechargeable battery into the robot

You have to insert the rechargeable battery before use.

 1 

 Press the ribbed sections on the battery cavity cover to unlock it.



 2 

 Slide the battery cavity cover off the robot.

 3 

 Remove the plastic from the rechargeable battery.



ENGLISH

9


 4 

 Place the rechargeable battery into the battery cavity.



Note: Make sure that the print on the battery points upwards and that the 

connectors point in the right direction.

 5 


 Slide the battery cavity cover back onto the robot.

Removing the protection tag from the remote control

The remote control works on a CR2025 coin-shaped battery. This battery 

is protected with a protection tag that has to be removed before use.

 1 


 Pull the battery protection tag out of the battery compartment of 

the remote control.

 

, Now the remote control is ready for use.



Preparing for use

Installing the docking station

 1 


 Insert the small plug of the adapter into the socket on the docking 

station (1) and insert the adapter into the wall socket (2). The display 

of the docking station lights up.

 2 


 Place the docking station on a horizontal, level floor against the wall.

Tip: To ensure the docking station stays firmly in the selected spot, you can 

fasten it to the wall with screws or with two strips of double-sided tape.

Note: Make sure that there are no obstacles or height differences 80cm in 

front, 30 cm to the right and 100cm to the left of the docking station.

Charging

When you charge the rechargeable battery for the first time and when the 

rechargeable battery is empty, the charging time is four hours. 

Your robot can be charged in two ways:



ENGLISH

10


 - On the docking station, either manually or automatically during use;

 - By connecting the robot directly to the mains



Note: When the rechargeable battery is fully charged, your robot can clean 

for up to 100 minutes.

Charging on the docking station 

 1 


 Place the robot on the plugged-in docking station.

 2 


 Press the power switch to switch on the robot.

 3 


 The battery indicator on the display of the docking station and the 

light in the on/off button on the robot start flashing.



Note: Because this is the first time you charge the robot, the display of the 

robot shows the booting indicator. 

 4 


 When the rechargeable battery is fully charged, the battery indicator 

on the display of the docking station and the light in the on/of button 

on the robot stop flashing.

Charging automatically during use

 1 


 When the robot has finished cleaning or when only 15% of the 

battery power remains, it automatically returns to the docking 

station to recharge. When the robot returns to the docking station, 

the light in the on/off button flashes.

 2 

 When the robot is positioned correctly on the docking station, the 



battery indicator on the display of the docking station starts to flash.  

 3 


 When the rechargeable battery is fully charged, the battery indicator 

on the display of the docking station and the light in the on/of button 

on the robot stop flashing.

Note: The robot only returns to the docking station automatically when it 

started cleaning from the docking station.

ENGLISH

11


Charging directly from the mains

 1 


 Insert the small plug of the adapter into the socket on the robot 

(1). Insert the adapter into a wall socket (2).

 2 

 Press the power switch to switch on the robot.



 3 

 When the robot is connected to the mains correctly, the light in 

the on/off button of the robot starts flashing. This indicates that the 

rechargeable battery is being charged.

 4 

 When the rechargeable battery is fully charged, the light in the  



on/off button of the robot stops flashing.

Preparing the room for a cleaning run

 - Before you start the robot on its cleaning run, make sure that you 

remove all loose and fragile objects from the floor.

Using your robot

Starting and stopping

 1 


 Press the on/off button. The light in the on/off button goes on and 

the robot starts cleaning.

 - You can press the on/off button on the robot.

 - You can also press the on off button on the remote control or on  

the pointer (FC8820).

ENGLISH

12


 2 

 Unless you press one of the mode buttons, the robot continues 

cleaning in auto cleaning mode until its battery runs low. In auto 

cleaning mode it follows repeated sequences of Z-pattern, random, 

wall-following and spiral movements. For more information on the 

cleaning modes, see section ‘Cleaning modes’.

 3 

 When the battery runs low, the light in the on/off button starts 



flashing and the robot returns to the docking station to charge. 

 4 


 You can also press the on/off button to interrupt or stop the 

cleaning run. If you press the on/off button again and there is still 

enough energy in the rechargeable battery, the robot continues 

cleaning in the auto cleaning mode.

 5 

 You can also make the robot return to the docking station before 



the rechargeable battery runs low by pressing the docking button on 

the remote control or the pointer (FC8820). The docking indicator 

on the display of the robot lights up and the robot returns to the 

docking station.



Note: If you did not start the robot from the docking station, it does not return 

to the docking station automatically when the rechargeable battery runs 

low. If there is still enough energy in the rechargeable battery, you can press 

the docking button to make the robot return to the docking station. If the 

rechargeable battery is completely empty, you have to place the robot on the 

docking station manually.   

Cleaning modes

Next to the auto cleaning mode, this robot has four individual cleaning 

modes that can each be activated by pressing the appropriate button.

Z-pattern mode

 - In Z-pattern mode, the robot cleans by making Z-shaped loops 

through the room to clean large areas.

ENGLISH

13


Random mode

 - In this mode, the robot cleans the room in a mixed pattern of straight 

and crisscross movements.   

Wall-following mode

 - In this mode, the robot follows the walls of the room to give the area 

alongside the walls an extra clean.

Spiral mode

 - In this mode, the robot makes a spiral movement with the fan at turbo 

speed to clean a dirty area thoroughly.

Manual driving

 1 


 Use the arrow buttons above and below and to the left and right 

of the on/off button on the remote control to navigate the robot 

through the room.

Note: Do not press the downward arrow when the robot is close to a height 

difference or a staircase.

ENGLISH

14


Using the cleaning time buttons

 - Press the maximum cleaning time button to make the robot clean  

in auto cleaning mode until its rechargeable battery runs low.  

When the robot has finished cleaning, it returns to the docking station 

automatically if it started from the docking station. If the robot started 

from another point in the room, press the docking button to send it 

back to the docking station.

 - The other cleaning time buttons allow you to let the robot operate for 

60, 45 and 30 minutes respectively. When the cleaning time is finished, 

the robot automatically returns to the docking station when it started 

from the docking station. If the robot started from another point in the 

room, press the docking button to send it back to the docking station.



Using cleaning programs

Setting clock time and day

If you want to use cleaning programs, you have to set the clock time and 

the day of the week on the display of the docking station first. For the 

pictures that belong to the steps below, see the fold-out pages at the back.

 1 

 Press the set button. The set mode indicator and the clock time 



indicator start flashing.

 2 


 Press the select button once. The hour indication starts flashing.

 3 


 Use the + and - buttons on the remote control to set the hour.  

The set hour appears on the display.

 4 

 Press the select button to confirm the hour set. The minutes 



indication starts flashing.

 5 


 Use the + and - buttons on the remote control to set the minutes. 

The set minutes appear on the display.

 6 

 Press the select button to confirm the minutes set. The indication 



‘Su’ for Sunday starts flashing.

 7 


 Use the + and - buttons on the remote control to set the current 

day of the week.

 8 

 Press the select button to confirm the day of the week.



 9 

 Press the set button to confirm the clock time and day of the week 

setting. Both the set mode indicator and the clock time indicator 

stop flashing and turn solid.



ENGLISH

15


Programming cleaning times

If you have set the time and the day of the week on the display of the 

docking station, you can program cleaning times for your robot. For the 

pictures that belong to the steps below, see the fold-out pages at the back.

The programming options available are:

Program


Indication on display

Cleaning every day

All day indications are on

Cleaning on weekdays

Mo to Fri indications are on

Cleaning on 2 consecutive days

Indications of 2 days are on, e.g. Fri and Sa

Cleaning 1 day a week

Indication of selected day is on

 1 


 Press the set button. The set mode indicator and the cleaning 

program indicator start flashing.

 2 

 Press the select button once. The hour indication starts flashing.



 3 

 Use the + and - buttons on the remote control to set the hour.  

The set hour appears on the display.

 4 


 Press the select button to confirm the hour set. The minutes 

indication starts flashing.

 5 

 Use the + and - buttons on the remote control to set the minutes. 



The set minutes appear on the display.

 6 


 Press the select button to confirm the minutes set. The indication 

‘Su’ for Sunday starts flashing.

 7 

 Use the + and - buttons on the remote control to toggle between 



cleaning programs (see the table above for the programming  

options available).

 8 

 Press the select button to confirm the program selected.



 9 

 Press the set button to confirm the programming. Both the set  

mode indicator and the cleaning program indicator stop flashing  

and turn solid.

 10 

 When you have set a cleaning program, the display shows the cleaning 



program indicator and the day or days selected. If you leave the robot 

on standby and its rechargeable battery is fully charged, it will start 

cleaning at the programmed time on the programmed day or days.

Fan speed buttons

You can use the fan speed buttons to increase the fan speed to turbo or to 

switch off the fan. The default setting is normal fan speed.

ENGLISH

16


1  Turbo fan speed increases the suction power of the robot.

2  You can switch off the fan by pressing this button.

3  Press this button for normal fan speed.

Clap response

 -  When all icons on the display flash, the robot is malfunctioning. To stop 

the icons flashing and see what is wrong, clap you hands once. This 

makes the error code appear on the display. See chapter ‘Error codes’ 

for the explanation of what these error codes mean.

Using the dry wipe attachment

The dry wipe attachment is a feature that allows you to clean hard floors 

with dry wipes.

Preparing the dry wipe attachment for use

 1 


 Turn the robot upside down and place it on the floor or on a table.

 2 


 Place the dry wipe on a table and place the dry wipe attachment on 

the wipe with its fixation lugs pointing towards you.

 3 

 Fold both ends of the dry wipe around the dry wipe attachment 



and fasten the dry wipe onto the attachment by pushing the fixation 

blocks into the recesses.

 4 

 Insert the fixation lug of the dry wipe attachment into the opening 



just behind the wheel on one side of the robot and push until you 

hear it lock into place with a click. Then repeat these actions on the 

other side.

 5 


 Turn the robot and place it on the floor on its wheels with the dry 

wipe attachment touching the floor.



Using the robot with the dry wipe attachment

 When the dry wipe attachment is attached, you can use the robot in any 

mode and on all hard floors. Do not use the dry wipe attachment on 

carpet or rugs.



Removing the dry wipe attachment

Remove the dry wipe attachment as soon as you have finished wiping  

the floor.

ENGLISH

17


 1 

 Turn the robot upside down and place it on the floor or on a table.

 2 

 Push one end of the dry wipe attachment towards the wheel on the 



other side of the robot to release it. Then pull the attachment off  

the robot.



Using the pointer (FC8820)

Charging the pointer

The pointer has a rechargeable battery that can be charged with the  

USB cable supplied.

 1 


 Insert the micro-USB plug into the socket in the bottom of the 

pointer.


 2 

 Insert the USB plug into a USB charger or a USB port on your 

laptop.

 3 


 The charging light on the pointer lights up solid. Charging takes  

30 minutes. When the charging light goes off, the rechargeable 

battery is fully charged.

Navigating the robot with the pointer

 - When you press and hold the pointer button, the pointer emits a beam 

of infrared light. With this beam you can drag the robot in a particular 

direction. As long as you keep the button pressed and keep pointing 

in the direction you want the robot to move, it continues to move in 

that direction. When you release the pointer button, the robot starts 

cleaning in auto cleaning mode.

 - With the pointer you can send the robot to a specific area in the room 

to give this area an extra-thorough clean.

ENGLISH

18


Using the virtual wall unit (FC8820)

Placing the batteries in the virtual wall unit

The virtual wall unit operates on four AA batteries.

 1 

 Push the two release tabs at the bottom of the back cover (1)  



and slide the back cover upwards and off the virtual wall unit (2).

 2 


 Take four new AA batteries from the pack and insert them into the 

battery compartment of the virtual wall unit.



Note: Make sure the + and - poles of the batteries point in the right direction.

 3 


 Slide the back cover onto the virtual wall unit again.

Positioning the virtual wall unit to stop the robot

You can use the virtual wall unit to prevent the robot from entering a 

room or area that you want to keep it out of.

 1 


 Place the unit at a spot beyond which you do not want the robot to 

go, e.g near an open door to a room that is off-limits to the robot  

or at the top of a staircase.

 2 


 Switch on the virtual wall unit with the on/off slide on top of  

the unit.

 3 

 Switch on the robot for a normal cleaning run.



 4 

 When the robot comes too close to the virtual wall unit, the light 

on the virtual wall unit starts flashing and the virtual wall unit emits 

a beam of infrared light. This beam of infrared light makes the robot 

change its course and move away from the virtual wall unit.



Достарыңызбен бөлісу:
  1   2   3   4   5




©emirsaba.org 2024
әкімшілігінің қараңыз

    Басты бет