Конструкциялық материалдар және термоөңдеу Конструкционные материалы и термообработка Constructional materials and heat treatment Учебное пособие для специальности: 5В071200– «Машиностроение»


particles in slag chambers, located on a way of their following, arrive in



Pdf көрінісі
бет48/77
Дата06.07.2022
өлшемі1,99 Mb.
#37521
1   ...   44   45   46   47   48   49   50   51   ...   77

particles in slag chambers, located on a way of their following, arrive in 
regenerators. The regenerator represents the chamber in which there is a fire-
resistant nozzle with vertical channels. In the lower part regenerators are 


182 
connected to channels on which gas and air arrives and burning products depart. 
For regulation of the direction of movement of gas and air in the furnace, and 
burning products to a chimney in channels reversing valves are established. 
Steel melting in electric furnaces. 
Arc and induction electric furnaces. are applied for melting steel Arc electric 
furnaces have bigger distribution, than induction, as cost of melted steel in them
lower. 
The share of electrical steel makes about 10 % from the general production of 
steel. 
Electrical-melting furnaces work at a three-phase alternating current. It is 
impossible to use a direct current, as it causes the electrolysis phenomena in a 
liquid bath. 
The furnace consists of a steel casing with the spherical bottom, laid out inside 
a fire-resistant brick. From above the working space of the furnace is blocked by 
the demountable arch with three openings through which graphite electrodes are 
passed. Electrodes are fixed in special water cooled electrode carrier and by 
means of the special mechanism can rise and fall thanks to what between 
electrodes and the metal bathroom in the course of work supports a certain 
distance. The furnace has two basic segments. For a furnace inclination at steel 
plum through a trench the turn mechanism is provided. The electric current 
moves to electrodes on a flexible cable from the lowering transformer. 
In high-capacity furnaces (more 5t) loading of stork is made from above the 
crane, for this purpose the arch becomes the demountable. In furnaces in 
capacity to 5t. the arch fixed and loading of stork is carried out through a 
working window. 
Now arc steel-melting furnaces with weight from 0,5 to 200 t. and more work. 
Fig. 3.1. Scheme of the oxygen converter. 
1-liquid cast iron., 2-oxygen lance, 3-notch. 
4 nozzle., 5 mouth., 6 lining-up, 7-steel casing. 


183 
Fig. 3.2. Scheme of the martin furnace. 
Fig. 3.3. The scheme of the arc electric furnace for steel melting. 


184 
Fig. 3.4. Scheme electro induction furnaces 


Достарыңызбен бөлісу:
1   ...   44   45   46   47   48   49   50   51   ...   77




©emirsaba.org 2024
әкімшілігінің қараңыз

    Басты бет